ASSO MULTILUBE

Asso Multilube is a special, finely dispersed formulation of water based mould release for rubber molding application. It offers excellent release and slip properties and is resistant to mechanical stress. Its wetting and spreading properties are excellent.

Advantages:

• Fast Curing
• Multiple release
• Non- Flammable
• Easy to Handle  

Direction for Use

• Mold surface must be thoroughly cleaned and dried. All traces of prior release must be removed.
• Preheated the mold to 60oC-80oC and apply Asso Multilube using sprayer and wait few seconds for drying. When properly applied to preheated surface this water based product chemically bonds to the mold surface to form a thin inert thermally stable coating, if the surface is found to be more sticky, then apply Asso Multilube little more on that particular surface for better release.

Handling & Storage

Store in sealed containers in dry condition at temperatures between 10-50oC, away from direct heat, sunlight, dust and moisture. Protect from frost. Containers once opened should be shut tightly to prevent contamination. Stocks should be used on first in, first out basis.